Noco-genius G1100 Manuel d'utilisateur télécharger pdf (Page 10)

1716

G1100

geniuschargers.com

CHARGING STEPS

USING THE G1100

Step 1: Diagnostics

Checks the battery voltage to make sure battery connections are good and the

battery is in a stable condition before beginning the charging process.

Step 2: Recovery

Initializes the Recovery process, if needed, for deeply discharged or sulfated

(desulfation) batteries by pulsing small amounts of current.

Step 3: Soft Start

Begins Bulk charging process with a gentle (soft) charge.

Step 4: Bulk

The Bulk charging process continues and returns 80% of the battery capacity.

Indicated by the 25%, 50% and 75% CHARGE LEDs.

Step 5: Absorption

Brings the charge level to 90%. The battery charger will delivery small

amounts of current to provide a safe, efcient charge and limit battery gassing.

Step 6: Trickle

Battery is fully charged and ready to use, indicated by the 100% CHARGE

LED being a solid Green. In this step, the battery charger will only delivery

enough current that the battery needs. If the battery tells the charger that more

current is needed, the battery charger will switch to Maintenance.

Step 7: Maintenance

Continuously monitors the battery voltage to determine if a maintenance

charge should be initiated. If the terminal voltage falls below 6.4V (6V) and

12.8V (12V), the charger will start the Maintenance cycle until voltage reaches

7.2V (6V) and 14.4V (12V) and then discontinues the charge cycle. The cycle

between Trickle and Maintenance is repeated indenitely to keep the battery at

full charge, without overcharging. The battery charger can be left connected

indenitely.

USING THE G1100

WICKED SMART FEATURE

AUTO-MEMORY. If at any time the battery charger is disconnected from

its power source, either from a power loss or accidentally disconnecting

the AC power plug from the electrical outlet, the battery charger will

remember the previously selected charge mode when power is restored.

The battery charger will automatically resume the charging process to

ensure your battery is fully charged.

Now That’s Smart, Wicked Smart.™

WICKED SMART FEATURE

CHARGE LED’s. The CHARGE LEDs indicate the health of the battery

from 25% to 100%. 25% means weak and 100% means fully charged.

A “blinking” CHARGE LED indicates the current status of the charge

process. When the CHARGE LED turns “solid,” the charge process is

complete.

Now That’s Smart, Wicked Smart.™

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Noco-genius G1100 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Fournisseurs d'énergie Noco-genius G1100